Change inventory size Space Engineers
Rent your own Space Engineers server at 4Netplayers.com
In this article we describe how you can change the size of the player inventory.
We will also explain how you can change other multipliers.
SpaceEngineers-Dedicated.cfg
One possibility is to change the settings in the SpaceEngineers-Dedicated.cfg.
However, this is only possible if the server has never been started.
If the server has been started, you have to change the values in the savegame.
We explain how to do this below.
To edit the SpaceEngineers-Dedicated.cfg', your server must be in Advanced Mode.
Find the following line in the config:
<InventorySizeMultiplier>1</InventorySizeMultiplier>.
Change the 1 to the value you want.
Important: Too high values can have unwanted side effects!
By the way, you can also adjust other values than just the inventory size.
A list of available settings can be found below.
When you have made all the settings you want, click on "Save" and start your server.
sandbox.sbc & sandbox_config.sbc
If your server has already been started, the inventory size can only be changed in the savegame itself.
How to download your savegame is described HERE.
You must make your settings in both sandbox.sbc
and sandbox_config.sbc
!
If you edit only one file, the changes will not be applied correctly!
Find the following line in both files:
<InventorySizeMultiplier>1</InventorySizeMultiplier>
Change the 1 to the value you want.
Important: Too high values can have unwanted side effects!
By the way, you can also adjust other values than just the inventory size.
A list of available settings can be found below.
Save both files and upload them back to the Saves FTP.
Settings
Setting | Description |
---|---|
<InventorySizeMultiplier>1</InventorySizeMultiplier> | Multiplier for inventory size Default is 1 |
<BlocksInventorySizeMultiplier>1</BlocksInventorySizeMultiplier> | Multiplier for block inventory Default is 1 |
<AssemblerSpeedMultiplier>1</AssemblerSpeedMultiplier> | Determines the assembler speed Default is 1 |
<AssemblerEfficiencyMultiplier>1</AssemblerEfficiencyMultiplier> | Determines the efficiency of the assembler The higher the value, the less material is needed Default is 1 |
<RefinerySpeedMultiplier>1</RefinerySpeedMultiplier> | Determines the speed of the refinery Standard is 1 |
<WelderSpeedMultiplier>1</WelderSpeedMultiplier> | Determines the speed of the welder Standard is 1 |
<GrinderSpeedMultiplier>1</GrinderSpeedMultiplier> | Determines the speed of the drill Default is 1 |
<HackSpeedMultiplier>0.33</HackSpeedMultiplier> | Determines the speed of the hack Default is 0.33 |
<FloraDensityMultiplier>1</FloraDensityMultiplier> | Determines the number of plants Too high values can negatively influence the performance Default is 1 |
<HarvestRatioMultiplier>1</HarvestRatioMultiplier> | Determines how many materials you get Default is 1 |